The Right Chemical for Industrial Cleaning: Balancing Effectiveness, Safety and Cost

In production plants, cleaning is often seen as just a maintenance activity. Yet a poorly chosen cleaning chemical can damage equipment, create occupational safety risks or increase costs through excessive consumption. An effective cleaning programme is the combination of the right chemical, the right concentration and the right application method.

Know your soil

The first step in choosing a cleaning chemical is to identify the type of soil to be removed:

  • Oil and grease: Alkaline cleaners or solvents,
  • Limescale and mineral deposits: Acidic cleaners and chelating agents,
  • Organic soils and proteins: Surfactant-based alkaline products,
  • Resin and paint residues: Suitable solvents.

The building blocks

Surfactants

At the heart of cleaning products, surfactants (BiyoSurf) lower the surface tension of water, lift soil from the surface and keep it suspended in solution. They are one of the basic raw materials for detergent and cleaning product manufacturers.

Solvents and degreasers

For oils, resins and heavy soils that cannot be removed with water, industrial solvents (BiyoThinner) and heavy-duty degreasers (BiyoDegreaser) are used. When choosing a solvent, flash point, evaporation rate and ventilation of the work area must always be considered.

Chelating agents

Calcium and magnesium ions in hard water reduce the effectiveness of many cleaning products. Chelating agents (BiyoChelate) bind these ions, maintaining cleaning performance and preventing limescale spots on surfaces.

pH control

Neutralising surfaces and wastewater after cleaning is important both for equipment life and for compliance with environmental regulations. Neutralisers (BiyoNeutral) provide controlled pH adjustment.

Safety always comes first

  • Read the Safety Data Sheet (SDS) of every product and share it with your employees.
  • Use suitable personal protective equipment.
  • Never mix acidic and alkaline products, or chlorinated products with other chemicals.
  • Store products in their original, labelled packaging.

Measure cost correctly

The real cost of a cleaning chemical should be calculated not by its price per litre but together with use concentration, cleaning time, labour, water and energy consumption, and its effect on equipment. A concentrated, effective product is often more economical overall.

Frequently asked questions

What is the advantage of using a concentrated product?

Concentrated products mean less packaging, less transport and less storage space. When diluted at the correct ratio, the cost per unit area or per part is often lower. Using dosing equipment is recommended to keep the dilution ratio under control.

Is a chelating agent needed in every cleaning product?

In plants using hard water and on surfaces at risk of scaling, a chelating agent significantly improves cleaning performance. In applications using soft water the need may be lower; the decision should be based on water analysis.

What should I consider when choosing a solvent?

Solvency, evaporation rate, flash point, odour and compatibility with the material to be cleaned should be evaluated together. In enclosed and poorly ventilated areas, products with a high flash point should be preferred and the precautions in the SDS followed.

Conclusion

The right chemical speeds up cleaning, protects equipment and keeps employees safe. Contact us for products and process auxiliaries (BiyoProcess) suited to your process.

Related products: Industrial Chemicals

Let us choose the right product together. For a solution, sample and technical data sheet suited to your plant or project, contact us.

← All articles